Proson RV2600 DTS Manuel du propriétaire télécharger pdf (Page 6)

Connection 1

Connection to audio/video components

DIGITAL IN terminals

Used for the input of digital audio signals. Connect these

digital input terminals to the appropriate digital output

terminals of the digital audio source unit such as a DVD or

CD player.

Use a good quality RCA coaxial cable or optical digital

cable.

DIGITAL OUT terminal

The digital signals coming in through the DIGITAL IN

terminals are sent out through this terminal.

Connect to the digital input terminal of a digital recording

device such as a CD recorder using a commercially-

available optical digital cable.

When inserting the plug of the optical cable, the protective

shutter of the terminal will open and you should hear it

click into position when fully inserted. Be careful that you

do not force the plug, because this could result in damage

to the protective shutter, the cable, or the unit itself.

AUDIO IN/OUT jacks

Analog 2-channel audio signal is input or output from

these jacks. Connect the component with commercially-

available RCA cables.

Make sure to connect:

white plug

white jack (L: left channel)

red plug

red jack (R: right channel)

EXTERNAL IN jacks

If your DVD player or decoder has 6 or 7-channel analog

audio outputs, connect them with good quality RCA

cables.

If the component to be connected has only 6 channel

outputs, do not use the SURROUND BACK jack.

CD-R, MD, etc.

DVD, CD, etc.

TAPE

DVD player or Decoder

CAUTION:

• Switch off the power to all equipment before making

connections.

• Read the instructions of each component you intend to use

with this unit.

• Be sure to insert each plug securely. To prevent hum and

noise, avoid bundling the signal interconnection cables

together with the AC power cord or speaker cables.

A B

1 2 3 4 5 6 7 8 9 10 11 ... 38 39

Commentaires sur ces manuels

Pas de commentaire

Proson RV2600 DTS Manuel du propriétaire Page 6

Commentaires sur ces manuels