Proson RV2600 DTS Manuel du propriétaire télécharger pdf (Page 18)

Speaker Configuration 3

Balancing relative volume between speakers using

Test Tone

The test tone function is useful to adjust the relative volume

between speakers.

Once the balance is set, you don’t have to change the

balance as long as the speakers aren’t moved.

• It is also possible to adjust the relative volume during

playback of DVD. See 19 page for details.

• Use the remote control from your listening position.

•The T.TONE button will not work when the SPEAKER

button is set to off. In that case, press the SPEAKER button

to turn the speakers on.

• The T.TONE button will not work when EXTERNAL IN is

selected. In that case, press the EXTERNAL IN button to

turn it off.

Press the T.TONE button.

The test tone is emitted from each speaker in the following

order at 2.5-second intervals.

FL, C, FR, SR, SB, SL, SW

• If certain speakers are not being used, (for example, no

center speaker) the noise sequencer will automatically skip

over that channel.

Adjust the master volume to the normal listening level.

Adjust the volume of each speaker so that the test tone

from each speakers sounds the same.

• The level of the speaker emitting the test tone can be

changed by pressing the LEVEL buttons.

• The level can be adjusted in 1 dB steps from –15 dB to +15

dB.

• If you press the CH.SEL (CHANNEL SELECTOR) button,

the test tone stays there. To go to the next speaker, press

the CH. SEL button again.

When the setting has been finished, press the T.TONE

button to stop the test tone.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 38 39

Pas de commentaire

Proson RV2600 DTS Manuel du propriétaire Page 18