Proson RV2600 DTS Manuel du propriétaire télécharger pdf (Page 26)

Surround Mode 2

When MPEG signals are input and IN-AUTO is selected,

the surround mode is set to MPEG automatically. The DSP

button doesn’t work.

When the source is PCM (2-channel stereo) and IN-AUTO

or IN-PCM is selected, or when analog stereo signals are

input, you can select one of the following surround modes:

DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx

MUSIC, DOLBY PRO LOGIC, VIRTUAL NARROW,

VIRTUAL WIDE, DTS NEO:6 CINEMA, DTS NEO:6

MUSIC, THEATER, HALL, STADIUM

• When the DSP button is pressed once, the current surround

mode is displayed. Press the DSP button repeatedly to

select any other surround mode.

• When you press the DSP button, the sound is cut off for a

moment.

• When the surround back speaker is set to “None”, Dolby

Pro Logic II appears instead of Dolby Pro Logic IIx.

• DOLBY DIGITAL or DOLBY DIGITAL EX can be selected

only during playback of a DVD disc recorded in DOLBY

DIGITAL format.

• The DSP indicator lights when THEATER, HALL or

STADIUM is selected.

(DSP: Digital Signal Processor)

STEREO

Press the STEREO button to select the stereo mode.

“STEREO” is scrolled, and sound is output from front

speakers (and the sub-woofer if connected).

To cancel the stereo mode, select any other surround mode

by pressing the DSP button.

• If you select the stereo mode while the digital signal of

DOLBY DIGITAL or DTS are being input, the multi-channel

sound is downmixed to 2-channel.

• If the SPEAKER button is set to off while the digital signal of

DOLBY DIGITAL or DTS are being input, the multi-channel

sound is downmixed to 2-channel automatically. And when

the SPEAKER button is set to on, it will return to the

previous surround mode.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 38 39

Pas de commentaire

Proson RV2600 DTS Manuel du propriétaire Page 26