Proson RV2600 DTS Manuel du propriétaire télécharger pdf (Page 37)

Troubleshooting

If you experience any problems with the unit, please take a

moment to look through this chart and see if you can solve the

problem yourself before you call your dealer or a TEAC

service center.

No power

Check the connection to the AC power supply. Check and

make sure the AC source is not a switched outlet and that,

if it is, the switch is turned on. Make sure there is power to

the AC outlet by plugging another item such as a lamp or

fan.

There is no sound or only a very low-level sound is heard.

Adjust the volume by turning the MASTER VOLUME

knob.

If the SPEAKER indicator isn’t lit, press the SPEAKER

button to turn it on.

Check that the speakers and components are connected

securely.

Check the operation of the connected component.

Check the audio output setting of your DVD player.

Select the proper source using the INPUT SELECTOR

buttons and the DIGITAL INPUTS button.

Select the proper surround mode (see page 25).

If “MUTE” is blinking on the display, press the MUTING

button to restore the sound.

No sound from surround or center speakers.

Check the speaker setting (see page 16).

Check the channel level setting (see page 18-19).

Select the proper surround mode (see page 25).

Check the audio output setting of your DVD player. Play a

multi-channel source.

Severe hum or noise is heard.

Check that the speakers are connected securely.

Make sure the line cords and speaker cables are as far

away from the AC supply as possible.

“DIGITAL” indicator blinks.

The unit cannot perceive the digital signal (see page 20).

Select the proper decoding mode by pressing the AUTO

button (see page 25).

No picture.

Check that the system is connected properly.

Turn on the TV.

Make sure you have selected the proper video input on

the TV so that you can view the pictures.

Select the proper video source using the INPUT

SELECTOR buttons.

Cannot view the on-screen display as it rolls rapidly.

The color system of the receiver does not match your TV.

Cannot listen to any station, or signal is too weak.

Make sure the antenna is properly connected.

Tune in the station properly.

If a TV is near the unit, turn it off.

Install the antenna again after relocating it to a better

reception position.

An external antenna may be required.

Though the broadcast is stereo, it sounds monaural.

Press the FM MODE button.

Remote control doesn’t work.

Press the POWER switch of the main unit to turn it

standby.

If the batteries are dead, change the batteries.

Use remote control unit within the range (5m) and point at

the front panel.

Clear obstacles between the remote control unit and the

main unit.

If a strong light is near the unit, turn it off.

If normal operation cannot be recovered, unplug the power

cord from the outlet and plug it again.

Maintenance

If the surface of the unit gets dirty, wipe with a soft cloth or

use diluted mild liquid soap. Be sure to remove any excess

completely. Do not use thinner, benzine or alcohol as they

may damage the surface of the unit.

1 2 ... 32 33 34 35 36 37 38 39

Commentaires sur ces manuels

Pas de commentaire

Proson RV2600 DTS Manuel du propriétaire Page 37

Commentaires sur ces manuels